Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Fresno?
Fireplace services in Fresno typically run between $149 and $2,500 depending on what your chimney or fireplace needs. A standard chimney sweep and inspection averages $189 to $350, while a gas fireplace repair usually falls between $175 and $650. Major work like relining a flue or rebuilding a firebox can push costs to $1,500 to $5,000 or more. In 2026, Fresno homeowners pay a small premium for certified, background-checked technicians who arrive with written pricing before any work begins, which is exactly what we do at Alcott Chimney Fresno.
Ruben Castellano leads our team, and since 2002 we’ve been upfront about one thing: the price we quote you before the job is the price you pay when it’s done. No surprises.
Fireplace Services Cost Breakdown (2026)
Here’s what you can expect to pay for common fireplace and chimney services in the Fresno area this year. These ranges reflect what we see across the San Joaquin Valley, from Woodward Park to Tower District to Sunnyside:
| Service | Typical Cost Range (Fresno, CA) |
|---|---|
| Chimney sweep (standard, Level 1) | $149 – $249 |
| Chimney inspection (Level 1 visual) | $99 – $189 |
| Chimney inspection (Level 2, with camera) | $249 – $449 |
| Gas fireplace diagnosis and repair | $175 – $650 |
| Gas log set replacement | $350 – $900 |
| Thermocouple or thermopile replacement | $150 – $325 |
| Chimney cap installation | $195 – $450 |
| Flue relining (DuraFlex stainless steel) | $2,200 – $5,500 |
| Firebox repair or rebuild | $1,200 – $4,000 |
| Creosote removal (heavy, glaze-stage) | $350 – $800 |
These numbers are real Fresno market ranges based on what we quote daily. The spread exists because no two fireplaces are in the same condition. A chimney that gets swept every year on a one-story ranch in Clovis-area Fresno is a faster job than a 30-foot flue on a two-story Fig Garden home that hasn’t been touched since the 1990s.
What drives the cost up? Three things do most of the heavy lifting:
- Access. Steep roofs, clay tile roofing common in older Fresno neighborhoods, and chimneys that require a taller ladder all add labor time.
- Creosote severity. Creosote is the tar-like, flammable residue wood fires leave behind in your flue. Glaze-stage creosote, which we see often in Fresno fireplaces used heavily through cold snaps in December and January, requires rotary cleaning tools and more passes than powdery first-stage buildup.
- Firebox and flue condition. Central Valley clay flue tiles crack eventually. Heat, water intrusion from seasonal rains, and the occasional earthquake tremor all take a toll. If your flue tiles are compromised, a sweep alone won’t fix the underlying problem.
We install and service professional trade materials including DuraFlex liner systems, HeatShield resurfacing, Gelco, Olympia Chimney, Famco, and Copperfield. Those brand names matter because off-brand substitutes can fail inside a season. We spec what the professionals specify.
What Affects Fireplace Services Pricing in Fresno
- Chimney height and roof pitch. Fresno ranch homes built in the 1950s and 1960s usually have lower-profile chimneys that are quicker to access. Newer northeast Fresno two-story builds near Clovis have taller flues and steeper pitches, which means more setup time and a higher labor charge.
- Creosote and soot volume. Homes in the Tower District and older central Fresno neighborhoods often have decades of buildup in flues that were converted from wood to gas, which leaves a sticky, acidic residue that regular brushes struggle with. Heavier removal takes longer and costs more.
- Gas fireplace brand and age. Some older gas units from the early 2000s use parts that are no longer widely stocked. If you’re in Copper River or Van Ness Extension, we usually stock common replacement thermocouples, pilot assemblies, and blowers on the truck, but obscure parts can add lead time and a small markup.
- Repair vs. service. A sweep is a set price. A repair is hourly plus parts. The more we uncover during an inspection, the more the quote changes, which is why we deliver written pricing before any work begins.
- Time of year. October through January is peak season in Fresno. Demand is higher, though our pricing stays consistent. The difference is scheduling: call in summer for the fastest turnaround and the most flexible appointment windows.
- Masonry condition. Water intrusion from valley rainstorms erodes mortar joints over time. If your mortar crown is cracked or spalling bricks are present, we’ll need to address those structural issues before any cosmetic work. That’s where the higher end of firebox and masonry repair pricing comes from.
We never charge extra for the things that should come standard. Every job includes a written price before work starts, a written guarantee on every repair, and a free return visit if that repair fails. Those inclusions aren’t upsells. They’re how Ruben has run this company since 2002.
What Do Fireplace Services Include?
We break it into three core services so that what you’re paying for is never vague:
Chimney Sweeping
A standard sweep in Fresno costs $149 to $249. It includes a full flue brushing with appropriately sized wire or poly brushes, removal of soot and creosote from the smoke chamber and damper assembly, and cleanup of the firebox. The work area stays protected from dust because we lay drop cloths and run a high-capacity vacuum throughout the job. You’ll see the inside of your flue before and after. We show you the creosote that came out because a good sweep result should never be invisible.
Chimney Inspection
A Level 1 inspection runs $99 to $189 and is recommended when your fireplace usage hasn’t changed and no problems are suspected. A Level 2 with a camera runs $249 to $449 and is what we recommend when you’ve bought a home with an unknown chimney history, when a property transfer is happening, when an earthquake has occurred, or when you’ve switched from wood to gas or back. The camera shows cracked flue tiles, hidden creosote pockets, and animal nests in real time, and you’re invited to look at the screen with us.
Gas Fireplace Repair
Gas fireplace repair in Fresno runs $175 to $650 for most jobs. That range covers pilot assembly replacement, thermocouple or thermopile swaps, gas valve servicing, blower motor replacement, and log set replacement. Gas work involves real risk. We want to be direct about that: gas line and gas valve issues should only ever be handled by a trained professional with the right tools and test equipment. If you smell gas or suspect a leak, leave the area and call your utility provider first, then call us at (559) 215-1714 once the immediate risk is handled. Our technicians are background-checked and identity-verified through the Threshold Standard, so you’ll know exactly who’s walking through your door.
Chimney Sweeping Costs in Fresno by Fireplace Type
| Fireplace Type | Sweep Cost Range | Notes for Fresno Homes |
|---|---|---|
| Wood-burning masonry fireplace | $169 – $249 | Most common in older central Fresno and Tower District homes. Heavier creosote is common with oak and eucalyptus wood. |
| Prefab wood-burning fireplace | $149 – $219 | Found in many 1980s-1990s subdivisions in northwest Fresno. Smaller flues, faster to sweep. |
| Gas fireplace (decorative log set) | $139 – $199 | Lighter soot, but still requires an annual inspection to catch burner imbalances and soot flaking. |
| Pellet or insert unit | $189 – $299 | More disassembly required. We see these mostly in newer northeast Fresno homes. |
How to Save on Fireplace Services
Saving money on fireplace care isn’t about finding the cheapest sweep. It’s about avoiding expensive repairs that come from deferred maintenance. A $200 sweep every year forestalls a $2,500 relining job down the road. Here’s how Fresno homeowners keep costs disciplined:
- Schedule during the off-season. May through September we have more scheduling flexibility, and you’ll beat the October rush. The service is the same price, but scheduling is faster and less stressed.
- Combine services. If you’re booking a sweep, ask us to inspect at the same time. Bundling a Level 1 inspection with a sweep is cheaper than doing them separately, and we’ll spot small issues before they become big ones.
- Burn the right wood. Stick to seasoned oak or almond, both common in the Central Valley. Green or wet wood creates more creosote per burn, which means heavier cleanup, possibly glaze-stage buildup, and a more expensive appointment.
- Don’t ignore small issues. A $50 mortar crackleft alone becomes a $1,500 repair after a rainy season. We’ll tell you upfront what’s urgent and what can wait, and we’ll put that in writing.
- Get the written quote before you commit. A free estimate from Alcott means a real dollar figure in writing. Call (559) 215-1714 and we’ll send a picture of the technician who will arrive, plus their name and a written price, before any work begins.
We don’t do discounts that penalize quality. The 365-Day Done Right Promise means if our repair doesn’t hold, we return free of charge within a year. That’s the whole warranty, in plain language, at no extra fee on any repair we write.
How Often Should You Service Your Fireplace in Fresno?
The National Fire Protection Association recommends an annual chimney inspection, and that guidance exists for a reason. In Fresno, fireplaces get used hard in short bursts from November through February, then sit dormant through the long hot summer. That cycle creates cycles of expansion and contraction in flue tiles and mortar, and those cycles create cracks. Cracks create pathways for sparks and carbon monoxide. An annual check catches hairline fractures before they become structural failures.
If you burn wood once a week or more during the cold season, plan on a sweep every year. If you have a gas fireplace, an annual inspection is still worth it because burner ports clog with fine dust and spider webs. The San Joaquin Valley’s dust isn’t kind to gas burner assemblies, and gas log soot can flake off and accumulate around the pilot and thermocouple.
Ruben can tell you the most common failure he sees in Fresno gas fireplaces in wall furnace communities like Calwa and Mayfair: spiders in the burner tubes in fall, blocking gas flow, causing delayed ignition. The fix is a quick disassembly and cleaning, and it’s included in a standard gas service call.
Can You Fix a Gas Fireplace the Same Day?
In most cases, yes. We carry the most common repair parts on our trucks: thermocouples, thermopiles, pilot assemblies, gas valve components, blower motors, and replacement ember materials. If your Fresno home is within our service area and the part you need is on the truck, we can usually complete the repair the same day we arrive.
Obscure parts for discontinued gas log sets or inserts may take a few days to source. We’ll tell you that upfront, in writing, before you spend a dollar. We don’t keep you guessing.
Do You Provide Free Estimates?
Yes. Every estimate is free, and it’s a real estimate: a specific dollar amount, written down and handed to you before any work begins. Not a vague range. Not a “we’ll see when we open it up.” The price we quote is the price you pay. If we find something during the job that changes the scope, we stop and get your written approval before proceeding. That’s how we’ve operated in Fresno since 2002, and applying that through every service call is what Ruben demands.
If you’re in Fresno, Clovis, or a nearby community like Sanger, Selma, or Kerman, call (559) 215-1714 and a live person answers. At 11 p.m. when something smells like smoke, you’ll talk to a human, not a voicemail queue. We’ll schedule the visit, send you the technician’s name and photo before we arrive, and you’ll see the same face at your door.
FAQs – Fireplace Services Cost
How much does a chimney sweep cost in Fresno?
A standard chimney sweep in Fresno costs $149 to $249, with most homes falling around $189. This includes full flue brushing, creosote and soot removal, firebox cleanup, and a visual inspection. For a specific quote on your home, call (559) 215-1714 and we’ll give you a written price before any work begins.
Is it cheaper to repair or replace a gas fireplace?
Repair is almost always cheaper. Most gas fireplace repairs in Fresno run $175 to $650, while a full replacement with new logs, burner, and installation typically runs $1,800 to $4,500. Repair makes sense when the unit is less than 15 years old and the firebox and flue are in good shape. Replacement makes sense when the unit is beyond its lifespan, parts are discontinued, or you want to upgrade efficiency. We’ll give you both prices in writing and let you decide.
How much does a Level 2 chimney inspection cost in Fresno?
A Level 2 chimney inspection in Fresno typically costs $249 to $449. This includes a camera scan of the full flue interior, which shows cracked clay tiles, hidden creosote, and animal nests. We recommend Level 2 when buying a home, after an earthquake, or when the chimney hasn’t been used in years. Call (559) 215-1714 to schedule.
Can you repair a gas fireplace the same day in Fresno?
Yes, in most cases. We stock common replacement parts on our trucks, so for most gas fireplace repairs, we can complete the work the same day. If your unit needs a part we don’t carry, we’ll tell you upfront and give you a timeline. Estimates are free, and the price is always in writing before any work starts.
What does the 365-Day Done Right Promise cover?
If we repair your fireplace or chimney and the repair fails within 365 days, the second visit is free. That includes diagnosis, labor, and replacement parts for same-scope repairs in that first year. This written guarantee comes standard on every repair and costs nothing extra. Call (559) 215-1714 for a free estimate.
How much does it cost to reline a chimney in Fresno?
Chimney relining in Fresno typically runs $2,200 to $5,500 depending on flue height, liner material, and access. We install DuraFlex stainless steel liners, which carry a professional warranty and are specified by chimney professionals rather than improvised with off-brand materials. For a written quote, call (559) 215-1714.
Trust and Verification: Who Shows Up at Your Door
We understand that opening your door to a stranger is a genuine concern. Many of our Fresno customers are home alone during the day, parents with young children, or older homeowners who want to know exactly who they’re letting in before the truck pulls into the driveway. So here’s what we do, every time, no exceptions:
- Every technician passes a background check and identity verification before ever stepping on your property. This is the Threshold Standard, not an optional upgrade.
- You’ll know the technician’s name and see their photo before we arrive. We send it to you digitally. When they ring your bell, they’ll show a photo ID badge that matches the name and photo from the notification.
- Every Alcott technician is uniformed, and our trucks are marked, so nothing about the visit is a surprise.
- Every job carries a written price before work begins and a written guarantee on every repair. If the repair fails, the second visit is free. That’s the 365-Day Done Right Promise.
This is what Ruben Castellano has insisted on since 2002, when Alcott Chimney Sweep joined the Threshold Group family of home-service companies. We compete on certainty: certain pricing, certain identity, certain outcomes.
Why Fresno Homeowners Choose Alcott Chimney Fresno
Fresno is our home market. We know what wood-burning fireplaces in the Tower District look like after 40 years of oak fires. We know what gas fireplaces in the newer northwest tracts look like after a few seasons of valley dust. We know that winter cold snaps hit the San Joaquin Valley hard and fast, and that chimney problems always seem to announce themselves at the worst possible moment.
We also know the materials that hold up here. That’s why we install DuraFlex liners, HeatShield resurfacing resin, Gelco sealer, Olympia Chimney caps, Famco dampers, and Copperfield chase covers. These are trade brands specified by chimney professionals, not box-store substitutes. They hold up to valley summers, valley winters, and valley dust storms.
Our Fireplace Services in Fresno page gives the full breakdown of what we do and where we work. If you’re ready to get your fireplace or chimney looked at, or if you just want a straight answer on price, start with that page and then call us.
Get a Free Estimate
A chimney sweep in Fresno costs $149 to $249. A gas fireplace repair costs $175 to $650. An inspection ranges from $99 to $449 depending on level and scope. Those are the real numbers we quote every day, and the only way to know what your fireplace needs is for us to look at it.
Call (559) 215-1714 and a live person answers, 24 hours a day, seven days a week. We’ll give you a written price before any work begins, send you the technician’s name and photo before we arrive, and stand behind every repair with the 365-Day Done Right Promise. If you’d rather see our full range of services first, visit our home page to learn more about Alcott Chimney Fresno.
Pricing reflects the Fresno market as of 2026. Alcott Chimney Fresno offers free estimates – call (559) 215-1714.
Written by Ruben Castellano, Owner at Alcott Chimney Sweep, serving Fresno since 2002.
What Our Customers Say
"Left no soot anywhere. Even brought a vacuum with a sealed filter. I'd use them again every fall."
- Beth H."The report he wrote up had pictures and clear notes for the insurance. That alone was worth it."
- Garrett I."Annual inspection and sweep. He used a camera to check the liner and found a cracked tile I had no idea about. Gave me a written estimate and did not push."
- Janet W.