Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Fowler, CA
Alcott Chimney Sweep handles chimney sweeping, inspection, and gas fireplace repair for homeowners across Fowler. Most Fowler homes we visit were built between the 1940s and 1970s with original masonry chimneys, and the Central Valley’s hot summers and tule fog winters work on that brick and mortar year-round. You’ll get a written price before any work starts, and a technician whose name and photo you’ll see before they ring your doorbell. Call (559) 215-1714 and a live person answers, day or night.
Why Fowler Homes Are Different
Fowler’s older housing stock means we see a lot of original brick and stone chimneys that have been through 50 to 80 Central Valley summers. The heat expands mortar joints; the cool, damp tule fog contracts them. Over decades, that cycle leaves hairline cracks that open up into spalling brick and loose mortar, especially on south-facing chimney exteriors. Inside the flue, the same issue shows up as cracked clay tile liners and gaps where mortar has crumbled out between sections.
Many Fowler chimneys were built with unlined flues, and that’s a real hazard. Heat transfers directly through the brick to wood framing, and creosote soaks into porous masonry where it can’t be brushed off. When we find unlined flues in Fowler, the conversation is honest: a stainless steel liner is the fix that brings the chimney up to modern safety standards, and we’ll show you the camera footage before you spend a dollar on it. Spare the Air days also matter here. Fowler sits in the San Joaquin Valley Air Pollution Control District, and mandatory no-burn restrictions apply in winter. We’ll tell you exactly what’s safe in your fireplace before fog season turns into burn season.
Styles & brands we work with
Our Main Fowler Services
These are the three jobs Fowler homeowners call us for most, each with its own page and its own pricing detail.
Chimney Sweep in Fowler
A proper sweep in Fowler starts with creosote assessment, because this is a city where winter fireplace use during fog stretches creates heavy loading. We brush the flue, remove the creosote and soot, and leave your firebox clean. But the Fowler difference is that we never treat a sweep as just a brush job. If our brushes meet a spot where the flue feels wrong, we stop and recommend a camera look before we keep going. Chimney Sweep in Fowler
Chimney Inspection in Fowler
Fowler’s older masonry chimneys get inspected with a camera, not just a flashlight at the firebox. We look at mortar joints, flue tile condition, and the cap. In Fowler, the most common findings are cracked clay tiles from thermal cycling and missing or rusted caps that let rain and birds in during the wet season. We give you a written report, and if there’s a repair, a written price to go with it. Chimney Inspection in Fowler
Gas Fireplace Repair in Fowler
Gas fireplaces in Fowler get used as supplemental heat during damp tule fog nights, which means thermopiles and igniters wear out. We repair and replace pilot assemblies, thermocouples, burners, and gas valves. Brand matters, because the box-store replacement you see online often doesn’t match the fireplace’s rating plate. We carry trade brands and match parts to the unit, not the other way around. Gas Fireplace Repair in Fowler
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fowler
We work on gas fireplace systems from Gelco, Olympia Chimney, and Famco. We keep common parts stocked for those lines, so most Fowler repair calls are one visit. Full details on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Fowler, CA
Here’s what Fowler homeowners can expect for common jobs. Exact prices are quoted in writing before work starts.
| Service | Typical range in Fowler |
|---|---|
| Standard chimney sweep (inspection included) | $189 – $259 |
| Chimney sweep with heavy creosote | $289 – $349 |
| Chimney cap replacement | $188 – $255 |
| Chimney crown repair | $350 – $600 |
| Stainless steel chimney liner | $2,700 – $3,900 |
| Gas fireplace clean and safety check | $149 – $189 |
| Thermocouple replacement | $165 – $220 |
| Gas valve replacement | $350 – $500 |
| Pilot assembly replacement | $200 – $300 |
What pushes a Fowler price up is access: a steep roof pitch, a two-story chimney with no safe ladder position, or a flue that hasn’t been cleaned in years and needs a chemical treatment. We don’t surprise you at the end. The written price you get before we start is the price you pay.
Neighborhoods We Serve in Fowler
We cover all of Fowler and the surrounding farm lanes, and we can usually schedule within a few days, not weeks.
- Downtown Fowler
- East Fowler
- Fowler Acres
- West of Highway 99
- South Fowler
Service Area – Cities Near Fowler
Our Fowler team also covers nearby Central Valley communities including Selma, CA, Parlier, CA, Sanger, CA, and Kingsburg, CA. If you’re on the edge of two service zones, call us and we’ll route the nearest crew.
Serving Fowler, CA - Our Local Coverage Area
We’re based in the Fowler area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Fowler
Most Fowler appointments are scheduled within 2 to 4 business days. If you smell smoke inside the house or see water staining around the chimney, call (559) 215-1714 and we’ll flag it as urgent and get a technician out as soon as one is free.
Basic sweeping and inspection don’t require a permit anywhere in Fowler. Structural repairs like a full rebuild or liner installation may, depending on the scope and the city’s current building code. We’ll tell you if a permit applies before any work starts, and we handle the paperwork on our end.
Yes. We service the city of Fowler plus the rural properties and farm roads around it. If you’re unsure whether your address falls in our coverage zone, call (559) 215-1714 and the dispatcher will confirm on the spot.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fowler Customers Say
"The report he wrote up had pictures and clear notes for the insurance. That alone was worth it."
- Garrett I."Annual inspection and sweep. He used a camera to check the liner and found a cracked tile I had no idea about. Gave me a written estimate and did not push."
- Janet W."Very respectful of my home. Took off his boots and wiped the hearth when finished."
- Carol D.