Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Fresno, CA
Alcott Chimney Sweep is Fresno’s chimney company for the valley’s particular mix of heat, fog, and wood-burning homes. Fresno’s long, hot summers mean your fireplace sits idle for months, then gets pushed hard through short, cold snaps from November to February. That cycle builds creosote unevenly, dries out mortar, and hides cracks until the first real fire finds them. We send a background-checked, identity-verified technician whose name and photo you’ll see before we arrive. Call (559) 215-1714 to schedule.
Why Fresno Homes Are Different
Fresno’s housing stock splits roughly in two, and each half needs its own kind of chimney care. Older central neighborhoods, think Tower District, Huntington Boulevard, and the Fig Garden area, are full of early-to-mid 20th century bungalows and ranch homes with original brick or masonry chimneys. Many predate modern liner standards, and four decades of valley temperature swings plus the occasional seismic jolt have left mortar joints cracked and flue tiles shifted. A Fresno-specific detail: many 1920s through 1940s chimneys in central Fresno were finished with a slightly flared concrete cap, known locally as a Fresno cap. That flare is a known weak point. It cracks at the shoulder, lets water into the brick below, and quietly starts a repair bill nobody budgeted for.
Meanwhile, the newer subdivisions north and east of the city, River Park, Woodward Park, Clovis-adjacent tracts, largely run on prefabricated metal chimneys. Those need different tools, different brushes, and a lighter touch. Scrubbing a prefab pipe with masonry techniques scores the liner. We train our technicians on both systems, so the sweep that shows up in the Tower District isn’t guessing at what a 1946 chimney needs, and the one in your northeast subdivision isn’t treating your factory-built pipe like it’s brick.
Add valley inversions to the picture. On no-burn days, when the air district restricts wood burning, your chimney sits cold and damp. Creosote hardens. When the restriction lifts and you light a fire the same night, that hardened residue is exactly what you don’t want between you and the flue. Fresno wood-burning is intermittent and seasonal, and that uneven rhythm is why a sweep in February often finds buildup a coastal chimney wouldn’t show for two more seasons.
Styles & brands we work with
Our Main Fresno Services
Fresno homeowners call us most often for two things: a thorough sweep before the burn season starts, and an inspection when they’ve just bought an older home or noticed something that didn’t look right. Here’s what each involves in Fresno specifically.
Chimney Sweep in Fresno
A sweep in Fresno isn’t just running a brush up the flue. In older masonry chimneys, we’re often removing hardened creosote that’s been baked by valley heat into a tar-like glaze, the kind that doesn’t brush off with a standard wire tool. In prefab chimneys, we match the brush to the pipe spec. Every sweep includes a visual check of the cap, crown, and flue as part of the job. You’ll know the technician’s name and see their photo before we arrive. Chimney Sweep in Fresno
Chimney Inspection in Fresno
Fresno’s older housing stock makes inspections the smartest first call for anyone buying a pre-1980s home. We camera-scan the flue and show you the footage. You don’t have to take our word that a liner is cracked; you can see it on the screen. Inspections in Fresno catch the local patterns: Fresno cap fractures, deteriorated mortar from seismic shifting, and liner damage from years of intermittent, high-heat burning. Chimney Inspection in Fresno
Gas Fireplace Repair in Fresno
Many Fresno homes have converted their wood-burning fireplaces to gas inserts, or built new with a factory gas unit. Gas fireplaces still need service. Ignition problems, sooty glass, a pilot that won’t stay lit, these are common in Fresno because months of disuse during summer let connections loosen and dust settle. We repair and service gas fireplaces with the same written-before-you-pay pricing as everything else. Gas Fireplace Repair in Fresno
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fresno
We work with the materials professionals specify. HeatShield for flue resurfacing, Gelco and Olympia Chimney products for chase covers and caps, and Famco for termination components. Parts are stocked locally in our Fresno operation, so most repairs don’t wait on a shipment. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Fresno, CA
What you’ll pay a chimney company in Fresno depends on what your chimney needs. Here are the typical ranges we see across the area.
| Service | Typical range in Fresno |
|---|---|
| Standard chimney sweep | $189 – $289 |
| Chimney sweep with heavy creosote removal | $249 – $349 |
| Chimney inspection (visual) | $149 – $199 |
| Chimney inspection with camera scan | $249 – $349 |
| Combination sweep + inspection | $299 – $399 |
| Gas fireplace cleaning and inspection | $189 – $269 |
| DuraFlex stainless liner (installed) | $2,200 – $4,800 |
| HeatShield flue resurfacing | $2,500 – $5,000 |
| Cap replacement (masonry or prefab) | $175 – $450 |
What pushes a Fresno chimney toward the top of those ranges? Heavy glazed creosote from years of irregular burning, a Fresno cap that needs rebuilding rather than patching, or a flue with damage that only the camera reveals. Whatever we find, you get a written price before any work starts. That’s not a courtesy; it’s the rule. No surprises on the invoice, no “while we were in there” charges.
Neighborhoods We Serve in Fresno
We cover the full city, from the old-growth neighborhoods to the newest northwest subdivisions. Our scheduling is built around Fresno geography, so a technician’s day is routed sensibly, not crisscrossing the 41 and the 99 all afternoon.
- Tower District
- Fig Garden
- Huntington Boulevard
- Woodward Park
- River Park
Most Fresno service calls fall within a three-to-five-business-day window, with faster scheduling available as demand allows. If you call during the fall pre-burn rush, plan a little further out.
Service Area – Cities Near Fresno
Beyond Fresno proper, our crews serve several nearby communities in the Central Valley. We work regularly in Clovis, CA, just northeast of us, and south through Sanger, CA and Fowler, CA. To the northwest, we cover Madera, CA as well. Same background-checked technicians, same written pricing, same brand of tools.
Serving Fresno, CA - Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Fresno
Most Fresno appointments are scheduled within three to five business days. During October and November, the pre-burn rush fills our calendar faster, so calling early in fall gets you a better window. Urgent issues, like smoke backing into the house, get priority routing.
Routine sweeping and inspections need no permits anywhere in Fresno. Structural repairs, like rebuilding a crown or installing a liner, may require a city permit depending on scope. We’ll flag that before work begins. Some HOAs, particularly in newer north and east subdivisions, ask for notice when exterior work is visible. Ask your HOA if you’re unsure.
Yes. Prefab metal chimneys require different brushes and techniques than masonry, and our technicians are trained on both. Newer homes in north and east Fresno subdivisions, as well as many gas-conversion setups, use factory-built pipe, and we service those as routinely as we do 1940s brick stacks in the Tower District. Call (559) 215-1714 to schedule, and we’ll send the right technician for your chimney type.
For a written price before any work starts, call Alcott Chimney Fresno at (559) 215-1714. A live person answers, day or night, and you’ll know your technician by name and photo before they ring the bell.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fresno Customers Say
"The report he wrote up had pictures and clear notes for the insurance. That alone was worth it."
- Garrett I."Annual inspection and sweep. He used a camera to check the liner and found a cracked tile I had no idea about. Gave me a written estimate and did not push."
- Janet W."Very respectful of my home. Took off his boots and wiped the hearth when finished."
- Carol D.